KERN & SOHN KDE-T - Manual (Page 13)

13 KDE-T-BA_IA-e-1210
6.7.1 Carry out linearization
Set menu item “CAL” in service menu (chap. 12.5). Afterward proceed as follows:
ò
“F” will appear briefly before the weighing scale changes to
adjusting mode and “CAL” will be displayed.

Press , the value for the first weight will be
displayed.
Here is an example of “12.500 kg”

Put on first weight in the centre of the weighing pan

Press , the value for the first weight will be
displayed.
Here is an example of “25.000 kg”

Put on second weight in the centre of the weighing pan

Press , the value for the third weight will be
displayed.
Here is an example of “50.000 kg”

Put on third weight in the centre of the weighing pan

Press
“F” will appear briefly before the weighing scale turns itself off.
Linearization has now been completed successfully.
We recommend that you adjust the weighing scale after
linearization. (see chapter 6.6)
An adjusting error or incorrect adjusting weight will be indicated by the error
message; repeat adjustment procedure.