KERN & SOHN KDE-T User Manual
Page 45
45
KDE-T-BA_IA-e-1210
(example)
“rESOLE”will appear briefly followed by a numeric value.
Now set readability. You can select between default values
that are dependent on the max load of the weighing scale.
Press
to change between values.
Press
to confirm the required value.
Here is an example:
0.001 kg
- 0.002 kg - 0.005 kg
– 0.010 kg – 0.020 kg –
0.050 kg
“F” will appear briefly before the weighing scale changes to
adjusting mode and “CAL” will be displayed.
Linearize weighing scale (See chap.6.7.1)
Dual range balance:
Weighing scale is turned off
(example)
Press
and hold;
Keep holding
pressed down and also hold down
at the same time until software version “P1.0x” is
displayed. Release both keys.
“SCL.TYP”will appear briefly followed by “1.rAnGE“.
Setting single range (“1.rAnGE“) – or dual range
(“2.rAnGE“) weighing scale
Press
to change between “1.rAnGE”and “2.rAnGE”.
Select „2.rAnGE“ and confirm by
.