KERN & SOHN KDE-T User Manual
Page 16
KDE-T-BA_IA-e-1210
16
Turning off pre-tare function:
Unload weighing pan and press
to set to zero
Press
repeatedly until „PrETArE“ is displayed flashing
Press
to delete the saved pre-tare value.
7.7
Plus/minus weighings
For example unit weight control, fabrication control etc.
Turn on weighing scale by
and wait for zero to be displayed.
Put desired weight on weighing pan
(example)
Press
to tare and “0.0000 kg” will be displayed
Remove desired weight and the desired weight will be shown as negative value
Put the test objects subsequently on the weighing plate, the respective deviation
from the nominal weight is displayed with the respective sign to „+“ and „-“.
According to the same procedure also packages with the same weight can be
produced, referring to a nominal weight.
Back to weighing mode by pressing the
button.