KERN & SOHN KDE-T - Manual (Page 32)

KDE-T-BA_IA-e-1210 32
8.3.2 Selection printed edition
Using this function data are selected which are to be sent via the RS232C
(not valid for data transfer mode BAPr ).

Turn on weighing scale by and wait for zero to be displayed.

Press and keep it pressed until „Unit“ appears on the display.

Press repeatedly until “LAPr“ appears

Acknowledge using , the current setting is displayed.
(example)

Select desired setting by .
(example)

Press to confirm setting and the current setting will be displayed.
(example)

Press to change setting
(example)

Acknowledge with . The balance returns to weighing mode.
By that way the user can configure his own data block, which then is
sent to a printer or to a PC.