KERN & SOHN KDE-T - Manual (Page 31)

31 KDE-T-BA_IA-e-1210
8.3 Interface parameters
Data output via interface RS 232 C
General hints
The previous condition for the data transfer between balance and a peripherical
device (e.g. printer, PC ...) is that the appliances are set to the same interface
parameters (e.g. baud rate, transfer mode ...).
8.3.1 Data transfer mode

Turn on weighing scale by and wait for zero to be displayed.

Press and keep it pressed until „Unit“ appears on the display.

Press repeatedly until “Pr“ appears

Acknowledge using , the current setting is displayed.
(example)

Select desired setting by .

Acknowledge selection by . The balance returns to weighing mode.