Connecting the seh to he power source – Cabletron Systems SEH-34 User Manual
Page 38
Advertising
INSTALLATION
Page 3-8
3.3
CONNECTING THE SEH TO THE POWER SOURCE
Note: The SEH has a universal power supply. This allows you to
connect the SEH to power sources from 90 Vac to 264 Vac, 47-63 Hz.
To connect the SEH to the power source:
1.
Plug the power cord into the back panel of the SEH.
2.
Plug the other end of the power cord into a grounded wall outlet.
3.
Verify that the PWR LED is on, this indicates that the SEH is
receiving power.
Advertising