Cabletron Systems SEH-34 - Manual (Page 45)

CONNECTING TO THE NETWORK
Page 4-7
Figure 4-4. The EPIM-F1, EPIM-F2 and EPIM-F3
3. Attach the fiber labeled 2 to the applicable transmit port labeled
TX, on the module.
4. At the other end of the fiber optic cable, attach the fiber labeled 1
to the transmit port of the device.
5. Attach the fiber labeled 2 to the receive port.
SMA 905 Connectors
SMA 906 Connectors w/
Half Alignment Sleeves
ST Connectors
ST Connectors
F1/F2
F1/F2
F3