Cabletron Systems SEH-34 - Manual (Page 55)

TWISTED PAIR WIRING TABLES
Page A-1
APPENDIX A
TWISTED PAIR WIRING TABLES
This appendix contains twisted pair wiring tables which will assist
you if you are using a Punch Down block (see Figure A-1) to wire your
twisted pair segments. The following tables are included in this
appendix:
• Table A-1 Twisted Pair Wiring from an SEH to a Punch Down
Block
• Table A-2 Twisted Pair Wiring from a Punch Down Block to a
10BASE-T Device
• Table A-3 Twisted Pair Wiring Summary