Crisp Solutions UCommand-525 - Manual (Page 16)

The UC-525 User’s Guide
12
After you have lined up your remote control with the UC-525 learning
eye, you can use the learning function. Follow these instructions:
Press the LEARN button for
three seconds.
You hear a beep and then you
see the unlock screen to the
right.
Note: This screen prevents
you from unintentionally modi-
fying the UC-525.
Press each number button in
any order until it disappears.
The device screen appears
again, with the
LEARN icon
under the LEARN button and
the “beep icon” starts blink-
ing. The UC-525 is awaiting a
signal from your device’s re-
mote control.
.
.