Crisp Solutions UCommand-525 - Manual (Page 7)

— Introducing the UC-525
3
Identifying Components
This section provides an overview of the UC-525’s features and con-
trols. Please refer to the following illustrations to identify the
components of the UC-525. (Refer to Chapter 3 for details on using
the LCD panel and controls.)
IR Port
Point the IR port
at the IR receiver
of the device you
wish to operate
Battery Cover
Remove this cover
to replace the four
AAA batteries.
LCD & Keypad
The LCD panel & hard
buttons let you
configure and operate
your devices. Tap
either once to activate
the UCommand-525
Learning Eye
Point your original
remote control to
this eye for learning.
UC-525