Crisp Solutions UCommand-525 - Manual (Page 31)

— Operating the UC-525
27
Running the macro
To run the macro, press the button that you assigned when you re-
corded the macro. In the preceding example the following events
will happen when you press 1 in the AUX device screen:
1. TV turns on
2. TV switches to video mode
3. Ten second delay
4. VCR turns on
5. VCR starts playing tape
The macro button’s original function will not work unless you delete
the macro using the DELETE button function. Refer to “Using the
Delete Function”.
Adjusting the LCD Backlight
You can adjust the ambient light sensitivity and the length of time
that the backlight stays on. Extensive backlight use affects the bat-
tery life. See “Power supply tips and precautions”.
Press the AMP and the
AUX button at the same
time for three seconds to
enter the LCD backlight
configuration mode.
Note: Do not confuse this
button combination with
the combination for recall-
ing the original LCD layout
(TV and DVD). Otherwise
your configuration will
be deleted.