Crisp Solutions UCommand-525 - Manual (Page 23)

— Operating the UC-525
19
Changing the LCD Layout
The device edit mode enables you to delete buttons or change the
icons on buttons in the device menus. Follow these instructions:
Press the button of the
device that you want to
configure, for three sec-
onds. The display will
start flashing.
You hear a beep and then
you see the unlock screen
to the right.
Note: This screen pre-
vents you from
accidentally modifying
your UC-525.
Press each number button
in any order until it disap-
pears.
Tap the screen once. The
display stops flashing.
UC-525