Crisp Solutions UCommand-525 - Manual (Page 29)

— Operating the UC-525
25
button
Press the TV button.
Press the power button.
This will power the TV on.
Press TV/Video. This
command will switch the
TV mode to Video mode
so that you can watch the
VCR.
You may need to set a
time delay between turn-
ing your TV on and turning
the VCR on. Push the
MACRO button to scroll
through the three options:
(A) two seconds;
(B) five seconds; and
(C) ten seconds.
Push the MACRO button
until the ten-second delay
(C) appears.
Note: You can set this
time delay between any
two commands.
UC-525