Crisp Solutions UCommand-525 - Manual (Page 28)

The UC-525 User’s Guide
24
Macro example
The following example will help you to better understand recording a
macro. This example macro would be used to turn on your TV,
switch to VCR input, and start playing a tape:
Press the MACRO button
for three seconds to enter
macro setup mode.
Press each number button
until it disappears.
Press the AUX button to
open the AUX screen.
Then press 1. You hear
three beeps.
The 1 button in the AUX
screen will be used to start
the macro during normal
operation mode.
Note: Do not use a device
button as your macro run
button. Using a device
button will remove the
button’s function from the
layout. For example, if you
use the TV device button
for the macro run key, you
will not be able to use the
UC-525 to control your TV
set.
A. Press AUX to open the AUX
screen
B. Press 1 to assign the macro start
button