Crisp Solutions UCommand-525 - Manual (Page 18)

The UC-525 User’s Guide
14
When you hear a beep and
see the OK icon, release
the button. The next button to
be mapped will start blinking.
Continue to press the buttons
on your device remote control
that correspond to the blinking
buttons on the UC-525.
You can skip to any button by
pressing the button you wish
to learn next on the UC-525
LCD panel and …
… by pressing the corre-
sponding button on your
device remote control.
Or, you can press a different
device button and configure it
with a different remote con-
trol.