MF Digital DVD-QuadraPRO (Rev: 08/01/02) - Manual (Page 16)

CD-3706/P Operator’s Guide
Document Revision: 030501.1 DVD-QuadraPRO LX Operator’s Guide
Document Revision: 070102
Page 15
• Make sure you power on the unit using the switches seen below that are
located on the back of the QuadraPRO.
• Once the proper voltage setting has been confirmed, it is time to turn on
the unit. The power switch is located at the back of the unit, next to the
AC power input. Wait a minute or two while the system starts up. The
screen will now read:
M F I N C .
D U P L I C A T I O N M A D E E A S Y
After the startup routine is complete, a series of self-diagnostics will be
performed. The screen will now read in sequence:
I N I T I A L I Z I N G S Y S T E M
Once complete, the unit will display the main operating screen:
S E L E C T C O P Y O R C O M P A R E