MF Digital DVD-QuadraPRO (Rev: 08/01/02) - Manual (Page 39)

CD-3706/P Operator’s Guide
Document Revision: 030501.1 DVD-QuadraPRO LX Operator’s Guide
Document Revision: 070102
Page 38
3) Lay the printer on its back and place the remaining bracket on the printer as pictured
below. Line up the holes and fasten in place using four countersunk screws provided.
Mounting the Printer
• Remove the two thumb-screws from
the bracket attached to the top of the
drive bays.
• Loosen the three screws in the
bracket attached to the printer.
• Gently place the printer on the top of
the drive bays.
• Line up the holes from which you
removed the screws in the lower
drive bay bracket with the key-ways
of the bracket attached to the printer,
and replace screws loosely threaded.