MF Digital DVD-QuadraPRO (Rev: 08/01/02) - Manual (Page 40)

CD-3706/P Operator’s Guide
Document Revision: 030501.1 DVD-QuadraPRO LX Operator’s Guide
Document Revision: 070102
Page 39
Making the Connection
• Connect the parallel printer cable to the printer port on the back of the
printer, and to the DB-25 female (25 pin) connector on the back of the
QuadraPRO.
• Connect the serial cable from the serial port located on the Spectrum2
printer to the serial port on the back of the QuadraPRO.
• Connect the power cord from the VAC Out on the Spectrum2 Printer to
a wall outlet or power strip.
• Flip the printer’s power switch to the ON position.