MF Digital DVD-QuadraPRO (Rev: 08/01/02) - Manual (Page 38)

CD-3706/P Operator’s Guide
Document Revision: 030501.1 DVD-QuadraPRO LX Operator’s Guide
Document Revision: 070102
Page 37
Preparing the Printer
Before the printer can be mounted to the QuadraPRO a few minor changes
must be made.
1) Turn off the power to the printer and disconnect all cables.
2) Turn over the unit so that the bottom is facing up. Using a Phillips head
screwdriver remove the four feet as depicted below and store the feet
and screws in a safe place for possible future use.