Page 16, Loading a disc, Removing a disc – MF Digital DVD-QuadraPRO (Rev: 08/01/02) User Manual
Page 17
CD-3706/P
Operator’s Guide
Document Revision: 030501.1
DVD-QuadraPRO LX Operator’s Guide
Document Revision: 070102
Page 16
Loading A Disc
• After the QuadraPRO’s power has been switched on, press the eject
button on the front of the recorder to open its disc tray.
• Load by carefully placing the disc (label side up) into the recessed area
of the disc tray, so that the disc lays flat.
• Press the eject button on the front of the recorder to close the disc tray.
Removing A Disc
• While the QuadraPRO power is still switched on, press the eject button
on the front of the recorder to open the disc tray.
• After the disc tray has completely opened, lift the disc by its edges and
carefully remove it.
• Press the eject button on the front of the recorder to close the disc tray.