MF Digital DVD-QuadraPRO (Rev: 08/01/02) - Manual (Page 30)

CD-3706/P Operator’s Guide
Document Revision: 030501.1 DVD-QuadraPRO LX Operator’s Guide
Document Revision: 070102
Page 29
Note: If discs failed to copy properly, the discs will be placed in the
reject area in front of the drives. These discs should not be
used. To help you determine the nature of the problem, error
messages can be displayed by pressing the “9” key on the
keypad.
Multiple Images Enabled
To make copies from hard disk images that were previously created with
the Multiple Images feature “enabled”, the steps are as follows:
• From the main operating screen depicted below:
S E L E C T C O P Y O R C O M P A R E
• Load as many blank discs as are required into the recorders. Press the
“COPY” key on the keypad. The screen will now read:
F R O M H D ?
• Press the “START/YES” key. The screen will now read:
I M A G E A = [ 1 ] B = [ 2 ] C = [ 3 ]
S E L E C T I M A G E
Along the top line of the display will scroll the available images,
identified by their number (1, 2, 3, and 4). The QuadraPRO defaults to
the first image (1). For the purposes of this example, press the “1” key
to select this image, followed by the “START/YES” key. The screen
will now read:
E N T E R Q U A N T I T Y :
C O P Y I N G . . . .
G O O D : 0 B A D : 0 O F : 0
Progress will be displayed on the screen during the operation:
C O P Y O K , P R E S S S T A R T
G O O D : 0 B A D : 0 O F : 0