Page 42, Preparing the printer – MF Digital DVD-QuadraPRO (Rev: 08/01/02) User Manual
Page 43
Advertising
CD-3706/P
Operator’s Guide
Document Revision: 030501.1
DVD-QuadraPRO LX Operator’s Guide
Document Revision: 070102
Page 42
Preparing the Printer
Before the printer can be mounted to the QuadraPRO, a few minor changes
must be made.
3) Turn off the power to the printer and disconnect all cables.
4) Turn over the unit so that the bottom is facing up. Using a needle nose
pliers remove the four feet as depicted below.
Advertising