Microtel Series 1000EX - Manual (Page 35)

MICROTEL Series 1000EX Dialer
29
Time And Date Setting
The Series 1000EX has an onboard real-time clock used to Time/Date stamp dialer
events, as well as allow status call-outs to occur at specific times. Time and Date are
maintained even if power is lost to the dialer. Use the following two commands to
initialize your dialer’s local time, or to set it back/ahead in conjunction with Daylight
Savings Time.
z Time Current dialer time in 24 hour format (military format).
0*60*
Report Time
0**60HHMM* Set Time
Example- Command:
0**600327*
Response: The time is zero three two seven.
z Date Current date in MMDDYY format.
0*61*
Report Date
0**61MMDDYY* Set Date
Example- Command:
0**61061298*
Response: The date is zero six one two nine eight.
The following is an example of when the date is May 14
th
, 2013.
Example- Command: 0**61051413*
Response: The date is zero five one four one three.