Microtel Series 1000EX - Manual (Page 62)

MICROTEL Series 1000EX Dialer
56
APPENDICES
APPENDIX A: Technical Specifications
A.1 Communications
Phone Interface: FCC 68 Registration Number: 1QEUSA-21532-AL-E
Pass-through Phone Handset
Cellular Phone Connection or equivalent.
Ringer Equivalence Number: 1.2B(ac)
LED Indicators: Dialer Off-hook/Ring Detect/Call Progress
Telephone Off-hook/FAX-in-progress
System Status/Power-fail
Dialing Capacity: 9 Phone Numbers, 60 Digits Each
Tone or Pulse Dial
Special Sequences for Selection of Pulse/Tone,
Pause, Call Progress Detection, Turning ON/OFF
Output Modules, Auto Acknowledging Alarms,
Communicating with FAX machines or Computers.
Call Progress Detection Dial Tone Detect
Busy Detect
Ring Back Detection
Quiet/Voice/Answer/Pager Terminal Tone detect
Answer Delay: 1-99 Rings (Call Back Acknowledge)
Fax: Group 3 Fax Compatible
Single-page Alarm Status or Dialer Configuration
Reports
A.2 Electrical
Input Power: Plug in Wall Power Supply, 120 VAC to 14.5 VDC
UL/CSA approved.
or 12-16VDC @ 0.5 Amp (Dialer only)
or 14.5-16VDC (Dialer with Battery)
Solar Power Interface Compatible
Power On/Off Switch
Power-fail Indicator
Externally Accessible Fuse
Optional: Surge Suppresor
Battery Operational: 12 Volt 2.2 AH Lead Acid Battery Option