Canon 1650 - Manual (Page 13)

13
AXIS 1650 User’s Manual Print Server Installation
2. Set the IP Address
• Before setting the IP address, make a note of the print server’s serial number (S/N), located
on its backside label. See Backside label of print server, on page 11.
• You should obtain an unused IP address from your network administrator.
Method Platform Comment
AXIS IP JumpStarter
software
Windows
Axis software that allows you to find print servers in your network
and assign an IP address to them.
See Set a Static IP Address using AXIS IP JumpStarter, on page 14
Arp/Ping
Windows
See Set a Static IP Address using ARP in Windows
98/Me/2000/XP/2003, on page 16
Unix/Linux See Set a Static IP Address using ARP in UNIX, on page 17
Canon’s NetSpot
Device Installer software
Windows
Canon software that allows you to find print servers in your network
and assign an IP address to them.
See Set the IP address using NetSpot Device Installer, on page 19
It is not possible to obtain a dynamic IP address using DHCP, since DHCP is disabled by default
in AXIS 1650. To enable DHCP in the print server, see DHCP Enabled, on page 46. You can,
however, obtain a DHCP address for the print server via AXIS IPJumpStarter or NetSpot Device
Installer. If you choose to obtain a DHCP address for the print server from these programs, the
DHCP function will be enabled in the print server.