Canon 1650 - Manual (Page 48)

Print Server Management and Configuration AXIS 1650 User’s Manual 48
WINS Enabled
Select the appropriate radio button to enable WINS (Windows Internet Name Service) over
TCP/IP. WINS uses NetBIOS names to allow Windows-based clients to locate resources on TCP/IP
networks.
Default value = Yes
WINS Server Address
Specify the IP address of the primary WINS server. The WINS server is used for identifying
computers with host names instead of IP addresses.
Default value =0.0.0.0
WINS Host Name
Specify the WINS host name, which will be used as the identifier of your print server.
Default = <blank>
Scope ID
Specify the NetBIOS scope to which the print server belongs. The scope ID is a character string
value that is appended to the NetBIOS name and used for all NBT communication. The scope ID
defines a group of computers that recognizes a registered NetBIOS name. Computers with the
same scope ID will be able to hear each others' NetBIOS "traffic" or messages.
Default value = <empty> which specifies the default scope.
SLP enabled
Enable or disable SLP communication to and from the print server.
Default = Yes
SLP scope list
Specify the name of the SLP scope to which the print server belongs. The scope refers to a set of
computers on a network that have been assigned a scope name.
Default value = DEFAULT
SNTP Server Address
Specify Time server IP address or Network Name.
Default = <blank>