Canon 1650 - Manual (Page 42)

Print Server Management and Configuration AXIS 1650 User’s Manual 42
Community Name:
Specify the community name for SNMP. Up to 32 alphanumeric characters can be entered.
Default = public
Restrictions
TCP Restriction Enabled
Users specified in the IP Address List are rejected or accepted, depending on TCP Restriction
Mode, to send printjobs over the print server.
Default = No
TCP Restriction Mode
• Accept Users specified in [TCP Restriction Address List] are permitted to send printjobs over
the print server.
• Reject Users specified in [TCP Restriction Address List] are rejected from sending printjobs
over the print server.
Default = Accept
TCP Restriction IP Address List:
Users specified are rejected or accepted to print using the print server. IP addresses or ranges of
IP addresses can be specified:
Example IP addresses: 10.13.16.150, 10.13.16.151
Example IP address range: 10.13.16.160-0.13.16.170
Default = <blank>
SNMP Restriction Enabled:
Users specified in SNMP restriction IP address list are rejected or accepted, depending on
SNMP restriction mode. To specify, browse the settings for the device using SNMP.
Default = No
If your print server is connected to a CAPT 1.0 printer you will receive an error message stating
Network Error if you are not allowed to print with this print server.