Canon 1650 - Manual (Page 40)

Print Server Management and Configuration AXIS 1650 User’s Manual 40
Help
The Help pages present basic information about the AXIS 1650 and the Web user interface.
Available Services from the Admin Mode
The following services are available from the Admin mode. An additional link to www.axis.com
is available from this mode.
This Print Server
This page contains a section that allows you to view and modify the general parameter setting
of the AXIS 1650, including the print server name, the node address, the password and the base
URL. Management operations, like restarting the AXIS 1650 and resetting its parameters to the
software default settings, are also available.
Caution!
General
Print Server Name
This name identifies the print server to the users and will be part of the default name of the
connected printer and printer queue name. The default name is AXISXXXXXX, where XXXXXX are
the last six digits of the print server serial number.
Example: If the serial number is 00 40 8c 18 16 36, the default print server name is AXIS181636.
System Name
This name identifies the network printer to the users.
Default = <blank>
All settings under This Print Server are modified in General Settings => Change | General
• All print server settings have default values that have been carefully selected by Axis. In
most instances, there is no need to change these default values.
• All network configuration should involve the Network Administrator.