Set a static ip address using arp in unix – Canon 1650 User Manual
Page 17
17
AXIS 1650 User’s Manual
Print Server Installation
Set a Static IP Address using ARP in UNIX
Follow the instructions below to set the IP address using ARP.
1. Type the following commands in the shell window:
Example:
2. The host will return
192.168.3.191 is alive
or a similar message. This indicates that the
address has been set and that the communication is established.
3. Access the print server’s Web pages ( - See page 37), select
Admin | Network Settings |
Detailed View | TCP/IP and define the Default Router and Subnet Mask. Make sure DHCP,
BOOTP and RARP are disabled.
Notes:
arp -s <ip address> <Ethernet address> temp
ping -s 479 <ip address>
arp -s 192.168.3.191 00:40:8c:18:1c:f0 temp
ping -s 479 192.168.3.191
•
The ARP command varies between different UNIX systems. Some BSD type systems expect
the host name and node address in reverse order.
•
When you execute the ping command for the first time, you may experience a
significantly longer response time than usual.