Canon 1650 User Manual
Page 16
Print Server Installation
AXIS 1650 User’s Manual
16
Set a Static IP Address using ARP in Windows 98/Me/2000/XP/2003
1. Open a Command Prompt and type:
Example:
2. If the host returns
Reply from 192.168.3.191 ...
or a similar message, the IP address
has been set successfully.
If the host returns Request time out... you need to reboot the print server and perform
steps 1-2 above again. Rebooting the print server is done by disconnecting and then
re-connecting the print server’s power supply.
3. Access the print server’s Web pages ( - See page 37), select
Admin | Network Settings |
Detailed View | TCP/IP and define the Default Router and Subnet Mask. Make sure DHCP,
BOOTP and RARP are disabled.
You have now set the IP address of the print server. Continue with Windows Installation, on
Note:
arp -s <IP address> <Ethernet address>
ping -l 479 <IP address>
arp -s 192.168.3.191 00-40-8c-18-1c-f0
ping -l 479 192.168.3.191
When you execute the ping command for the first time, you will experience a significantly
longer response time than usual.