Canon 1650 - Manual (Page 38)

Print Server Management and Configuration AXIS 1650 User’s Manual 38
Available Services from the User Mode
The following services are available from the User mode. A link to www.axis.com is available
from this mode.
Printer Overview
The Printer Overview page contains a section that allows you to view the general parameter
setting of the AXIS 1650 and the connected printer.
By clicking the printer icon a printer page opens, allowing you to view the status and the
supported capabilities of the connected printer. The extent of this information depends on the
printer model. From the printer page, you can also print a test page to the printer.
Underneath the printer icon is a colored symbol that indicates the status of the printer:
• green indicates that the printer is ready for printing
• yellow indicates warning
• red indicates error
Print Server Name
This name identifies the print server to the users. The default name is AXISXXXXXX, where
XXXXXX are the last six digits of the print server’s serial number.
System Location
This parameter displays where the print server is physically located, helping you to find the
printer to which you have sent your print jobs.
Most settings displayed in the User mode are modified from the Admin mode!
It is only possible to print a test page to Canon printers that support printing standard ascii
characters. For Canon printers supporting Canon Advanced Printing Technology and Canon
Advanced Raster Printing System, it is not possible to print a test page.