Solvline SG-1160 - Manual (Page 14)

SerialGate User Guide
14
Chapter 3. Hardware Description
This chapter provides hardware information including pin specification, dimensions and other
hardware-related information.
Exterior of SG-1160/ALL

Serial: RJ-45 socket for serial ports (RS-232/422/485). A user can select protocol from the
web manager using a web browser.

Power connector: Use 100 ~ 245 VAC cable

Reset: SerialGate reboots if this button is pressed for less than 3 seconds. If pressed for
longer than 3 seconds, SerialGate will restore factory default settings.

LED: Operation status of SerialGate. Next page describes the functions of each LED
display status.

WAN: Main network port used when connecting SerialGate to networking devices such as
Ethernet card, hub, and router.