Solvline SG-1160 - Manual (Page 51)

SerialGate User Guide
51
System
Update device server firmware, initialize the system or command port reset.
In or der to select System, press ‘ESC’ on the panel until ‘Main Menu’ comes up, and if ‘Main Manu’ is
displayed, press ‘<<’ or ‘>>’ until you see ‘System’. Then, press ‘Enter’ to change the details.
At any time ‘ESC’ is selected, it moves to the top menu.
Menu Option Default Description
Port Reset
Cancel Yes Cancel
<<, >> : Select option.
Enter: If Cancel is selected, it moves to the next
menu. If Yes is selected, that action is performed.
Factory Default
Reboot System
Port Reset
If ‘yes’ is selected in Port Reset, LCD displays the port number from 1 to 16 as below, and the cursor is
at the first one.
P o r t R e s e t
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6
Move the cursor to the port to be reset using ‘<<’, ‘>>’ keys and press ‘Enter’. Then, the corresponding
port will be reset.
Factory Default
‘Cancel’ and ‘Yes’ are selectable with ‘<<’, ‘>>’ keys. If a user selects ‘Yes’ and then ‘Enter’, configuration
resets to the factory default.
Reboot System
‘Cancel’ and ‘Yes’ are selectable with ‘<<’, ‘>>’ keys. If a user selects ‘Yes’ and then ‘Enter’, it prints out
‘Now Rebooting’ message and reboots the device server.
Verification
It verifies each interface HW of a device server.
In order to select System, press ‘ESC’ on the panel until ‘Main Menu’ comes up, and if the ‘Main Manu’
is displayed, press ‘<<’ or ‘>>’ until you see ‘Verification’. Then, press ‘Enter’ to change the details.
Press the ‘ESC’ at any time to move to the top menu.