Solvline SG-1160 - Manual (Page 39)

SerialGate User Guide
39
Chapter 6. Configuration via Telnet
Connection
Open your telnet client program and enter the IP address of SerialGate to connect. You need to enter
appropriate username and password to login. Please note that this username and password is used as
authentication method for Web as well. This means if username or/and password has been modified
from the telnet interface, modified values have to be entered to connect to web, and vice versa.
Factory default username : serialgate
Factory default password : 99999999
[def] commands - you can configure settings of SerialGate.
[def help] commands - you can view the use of the def command.
After changing values, you can see modified values with set view commands. These values are
not in effect unless you issue a def save command. Changes will be discarded if you do not save
current settings.