Solvline SG-1160 - Manual (Page 48)

SerialGate User Guide
48
Network Setup
Change the network configuration of the device server.
In order to select the Network Setup, press ‘ESC’ located left of the LCD panel until ‘Main Menu’ shows,
and when the ‘Main Manu’ is displayed, press ‘<<’ or ‘>>’ until you see ‘Network Setup’. Then, press
‘Enter’ to change the details.
Press ‘ESC’ at any time to go back to the top menu and it will ask if the user wants to save the change
to the Flash memory if there were any changes.
For more details about each m enu, please refer to “Chapter 5. Configuration via Web” and “Chapter 6.
Configuration via Telnet.”
Menu and selectable options are as follows.
Menu Option Default Description
Network line
Static IP,
DCHP Client
Static IP
<<, >> : Select option
Enter : Save the current option, and go to
the next menu.
IP Address 192.168.0.223 <<: Increase the value of the cursor
position.
>>: Move cursor to the next space.
Enter : Save the current option, and go to
the next menu.
Subnet Mask 255.255.255.0
Gateway 192.168.0.254
FTP Service Enable, Disable Enable
<<, >> : Select option
Enter : Save the current option, and go to
the next menu.
Telnet Service Enable, Disable Enable
SSH Service Enable, Disable Disable
WEB Service Enable, Disable Enable
PortView Address 0.0.0.0
<<: Increase the value of the cursor
position.
>>: Move cursor to the next space.
Enter : Save the current option, and go to
the next menu.