Solvline SG-1160 - Manual (Page 42)

SerialGate User Guide
42
def v3username
[string]
serialgate Configure the Username to use SNMP V3.
def v3password
[string]
none Configure the password to use SNMP V3.
def trapip
[address]
0.0.0.0
Configure the server IP address which transmits the TRAP
information.
def trapoprt
[Socket No.]
162
Configure the server Port which transmits the TRAP
information.
def trap_reset
[enable, disable]
Enable If Enable is selected, inform the "System reset info".
def trap_connect
[enable, disable]
Disable If Enable is selected, inform the "Serial Port opened info".
def
trap_disconnect
[enable, disable]
Disable If Enable is selected, inform the "Serial Port Closed info".
Serial Commands
You can set the communication and operation environment for serial port. Please refer to Chapter 5 for
details of each option.
Commands Default Description
def port x protocol
[disable,
com_redirect,
rfc2217
tcp_server,
Tcp_client,
tcp_broadcast,
Tcp_multiplex,
udp_server,
udp_client,
pair_master,
pair_slave,
modbus,
user]
rfc2217 Select the operation protocol to be used in serial port.
def port x interface RS232, Configure interface of serial port.