Solvline SG-1160 - Manual (Page 41)

SerialGate User Guide
41
def dns
<IP Address>
168.126.63.1 Set IP address of Domain Name Service
def portviewip
<IP address>
0.0.0.0
Configures IP of PC which PortView is installed
If IP is set to 0.0.0.0, PortView feature is disabled.
(Please refer to PortView User Manual in SerialGate
Utility and Documents CD for detailed information.)
def portviewport
<Port number>
4000
Set the socket number of a PC which PortView is
installed.
def ftp
[enable/ disable]
Enable
Enable or disable FTP service.
If disabled, you cannot connect to SerialGate via FTP.
def telnet
[enable/ disable]
Enable
Enable or disable Telnet service.
If disabled, you cannot connect to SerialGate via Telnet.
def web
[enable/ disable]
Enable
Enable or disable Web service.
If disabled, you cannot connect to SerialGate via Web.
def ssh
[enable/ disable]
Disable
Enable or disable SSH service.
If enabled, you can connect to SerialGate via SSH.
def name
[SerialGate name]
Product Name Set the name of SerialGate. (Max 32 bytes)
def snmp
[enable/ disable]
Disable
Enable or disable SNMP (Simple Network Management
Protocol)
- MIB-II (RFC 1213): System, Interface, IP, ICMP, TCP,
UDP
- MIB-I (RFC 1317): Serial Interface
def v1readwrite
[enable, disable]
Disable
SNMP V1/2 Attributes can read and write by SNMP Agent.
In order to read attributes only, change the feature to
"ReadOnly. ”
In order to read and write attributes change the feature to
"ReadWrite. ”
(Options : ReadOnly/ ReadWrite)
def v3readwrite
[enable, disable]
Disable
SNMP V3 Attributes can read and write by SNMP Agent.
In order to read attributes only change the feature to
"ReadOnly. ”
In order to read and write attributes change the feature to
"ReadWrite. ”
(Options : ReadOnly/ ReadWrite)