Sonics FM - Manual (Page 31)

Saved jobs will be numbered 1 through 9. Use the numerical keys to enter in
the desired job number (1 - 9). Once the job number is keyed in, press the
ENTER key. The following message will be displayed on the LCD screen:
All the parameters for that job will be saved under the number keyed in. To
return to system status READY, press the ENTER key.
Recall
To recall a job that has been saved, first access the “SAVE RECALL
OTHER” display (by pressing the INFO key 6 times). Then, press numerical
key 2 (since recall is in the second display position). The following message
will appear on the LCD screen display:
Use the numerical keys to enter in the number (1 through 9) of the job to be
recalled. Once the number is keyed in, press the ENTER key. The LCD
screen will display:
The system will not respond if there is no job saved under a number
corresponding to the numerical key pressed.
Other
The “OTHER” option in the “SAVE RECALL OTHER” display allows the
storage of Pressure, Booster Gain and Horn Number parameters. To record
these values, press the numerical key 3 on the keypad. The display will
change to:
To record a pressure, first press the CE key. This will clear out the current
entry.
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
30
I N S T R U C T I O N M A N U A L • M O D E L F M P O W E R S U P P LY
J O B N U M B E R : _ _
S AV E O. K . ! _ _
R E C A L L O. K . ! _ _
J O B N U M B E R : _ _
P R E S S U R E 0 0 0 . 0 0 P s i g
NOTE: Pressure is
reference only, this does
not change the actual air
pressure.