SUUNTO QUEST User Manual
Page 31
To put the device into sleep mode:
1. After the last step of general settings, when the device asks you to confirm
that the setting changes are done, keep
NEXT
pressed until the device goes
into sleep mode.
2. Press any button to activate the device again.
3. Set the initial settings, see Chapter 5 Getting started on page 12.
NOTE: When replacing the battery, only the time and date change. The device
remembers your previous initial settings and recorded exercises.
Example: adjusting alarm settings
When the alarm is on, is shown on the display.
To set the alarm on/off:
1. In the time view, keep
NEXT
pressed to enter the settings.
2. Browse to alarm with
START STOP
and confirm with
NEXT
.
3. Set the alarm on or off with
START STOP
and
LIGHT LOCK
. Confirm with
NEXT
.
4. Set the alarm time with
START STOP
and
LIGHT LOCK
. Confirm with
NEXT
.
When the alarm sounds, press stop (
LIGHT LOCK
) to turn it off.
After you have stopped the alarm, it sounds the same time the following day.
31
en