1 troubleshooting, 2 calibrating pods, Example: pairing suunto dual comfort belt – SUUNTO QUEST User Manual
Page 42: 42 13.1 troubleshooting, 42 13.2 calibrating pods
Example: Pairing Suunto Dual Comfort Belt
1. Remove the HR belt battery.
2. Reset the HR belt by inserting the battery positive side down.
3. In your Suunto Quest, follow the steps 1-3 from the instructions above.
4. Re-insert the belt battery positive side up and close the belt cover. Wait for
the message paired.
5. If the pairing fails, press
NEXT
to return to the pairing setting.
NOTE: When turn on POD or turn on belt text is shown on the display, Suunto
Quest waits for the pairing signal from the HR belt or POD for 15 seconds, during
which the corresponding HR belt or POD should be turned on.
13.1 Troubleshooting
If HR belt pairing fails, try the following:
1. Remove the battery from the belt.
2. Re-insert the battery upside down to reset the HR belt and remove the
battery again.
3. Scroll to the device's pairing option.
4. Insert the battery in the HR belt the right side up.
13.2 Calibrating PODs
You can calibrate Suunto Foot POD Mini or Suunto Bike POD with Suunto Quest
for accurate speed and distance measurement. Perform the calibration on an
accurately measured distance, for instance, on a 400 m running track.
42