TC-Helicon VoiceLive 2 User manual - Manual (Page 21)

To delete any single step, locate the step you want to
remove then enter Step programming mode. Tap
SHORTCUT to delete the current step.
To speed Step programming, all insertions and deletions
are automatically stored when you exit Step mode. If
you want to experiment without affecting an important
Step chain, you can either store the preset to another
location first (Steps are stored with presets) and work
there or perform a backup before experimenting and
restore when done.
The Tone, Pitch and Guitar FX Buttons
These three buttons apply live engineer features that are
“global” in that they affect all presets.
The TONE button makes your voice sound smoother
and brighter by applying studio-grade adaptive
compression, EQ, de-ess and gating.We recommend that
the TONE button be turned on and left active to
improve your overall vocal tone.
Press the PITCH button to add subtle Auto Chromatic
pitch correction which helps you sing more in tune.
If you have a guitar connected to the GUITAR IN jack,
pressing the GUITAR FX button will apply effects to your
guitar sound that will be heard through VoiceLive 2’s
main outputs. The guitar effects and dry signal will be
muted if a jack is connected to the GUITAR THRU jack.
Press and hold any of these buttons to access their
menus and make global changes.
First Impressions
21