TC-Helicon VoiceLive 2 User manual - Manual (Page 68)

lowest LEAD LEVEL value will determine the value.
Note that the LEAD EFFECT SENDS parameter on the
PRESET tab must be set to PRE in order for any signal
to get to the effect block when LEAD LEVEL is set to
OFF.
NATURALPLAY
This parameter defines how VoiceLive 2 derives the
musical information that makes the harmony voices
follow your song. The most common value for this is
AUTO INPUT SENSE which automatically decides
which of the GUITAR IN, MIDI IN and AUX IN you are
currently playing into so it can derive musically correct
harmonies. Changing the value of this parameter changes
the number and organization of settings in the
HARMONY tab.The values are described below:
o AUTO INPUT SENSE - Most harmony presets are
based on this mode.This mode automatically
decides which of the GUITAR IN, MIDI IN and
AUX IN you are currently playing so it can derive
musically correct harmonies from that input.
o GUITAR - This forces the current preset to look
only to the GUITAR IN for musical input. In the
case where you have a MIDI sequencer and guitar
into VoiceLive 2, this will cause it to ignore the
MIDI input for harmony control.
o MIDI - This forces the current preset to look only
to the MIDI IN for musical input. In the case where
you have a MIDI sequencer and guitar into
VoiceLive 2, this will cause it to ignore the guitar
input.
o AUX INPUT - Harmonies will ignore all but this
input if the other inputs are used simultaneously.
o SCALE - Changes the preset to scale mode which
will ignore ongoing musical input from an
instrument in favour of the Key and Scale setting
you need to input. Scale harmonies are a great
alternative to instrument-controlled harmony for
certain songs.
o SHIFT - Many doubling presets that also use the
Harmony block are based on this mode. SHIFT
The Edit Menu: HARMONY Tab
68