TC-Helicon VoiceLive 2 User manual - Manual (Page 34)

Method #3 - Recording dry vocal and guitar tracks:
You’ll need a fully dry mono vocal track and optionally, a
dry instrument track (guitar or keyboard) or midi
performance if you plan to use harmony. Set the I/O
parameters as such:
1. DIGITAL IN: USB: FULL MIX
2. DIGITAL OUT:VOCAL & GUITAR
Connect your mic and a guitar to VoiceLive 2 and your
headphones to the headphone out. Even though you’ll
hear fully processed vocals and guitar (with Guitar FX) in
the headphones, the output feeding your DAW will be
separate dry vocal and guitar that you can process later
with Method #2.
Digital Input Notes:
Sample rate is synchronized automatically to the incom-
ing digital audio stream.There is no independent config-
uration of sample rate in VoiceLive 2. When processing
an analog input such as the MIC and sending to VoiceLive
2’s digital out, sending a short bit of audio from your
recording application to either Digital in will set the sam-
ple rate.
When DIGITAL IN is set to USB:- or SPDIF: VOX L /
INST R, the MIC and GUITAR IN are disabled.
When DIGITAL IN is set to USB (or SPDIF): STEREO,
harmonies will follow the stereo audio coming from the
selected digital input on presets where NATURALPLAY
is set to AUX INPUT.
Digital Output Notes:
USB audio output will not function when either of the
SPDIF: options is chosen for the DIGITAL IN parameter.
SPDIF digital output is always available regardless of
DIGITAL IN or OUT settings.
USB Audio And ASIO Applications
PC-based ASIO apps such as Cubase may require you to
install a WDM to ASIO “wrapper” such as ASIO4ALL
which is available at www.asio4all.com in order for
VoiceLive 2 to be recognized as an audio device.
Connecting VoiceLive 2 To A Computer
34