TC-Helicon VoiceLive 2 User manual - Manual (Page 32)

The USB Connection
Connecting the supplied USB cable between VoiceLive 2
and your Mac or PC computer offers the following
benefits:
o Audio input and output for recording, processing
and monitoring without a separate audio I/O box
o MIDI connection from your computer to VoiceLive
2 without an external MIDI interface.
o Easy backup and restore of preset and system
settings
o Simplified system updates
o Information and tutorial videos
The VoiceSupport Application
This is a web-enabled application intended to enhance
your experience with VoiceLive 2. As well as keeping you
up-to-date with the latest TC-Helicon news items and
support materials, VoiceSupport simplifies system
updates, preset backups and product registration.
VoiceLive 2 does not need to be USB-connected in
order to access the tutorials, news and other downloads.
PC and Mac Installation
Point your browser to:
http://www.tc-helicon.com/products/voicesupport/support/
and click on the download links for your computer.
After installation is complete, connect your VoiceLive 2
and start VoiceSupport.
The first time you open VoiceSupport it may take a while
to load as it must download all of the newest content.
When the application finishes loading it should display
“VoiceLive 2” in the lower left corner indicating that
connected was successful. If it says “Not Connected”,
check that the USB cable is properly attached and then
click the blue connection button.You can use the Online
support links on the above page if you need to
troubleshoot. Also, VoiceSupport is updated periodically
so check that your version number (shown on
Connecting VoiceLive 2 To A Computer
32