TechniSat DIGIT ISIO S2 User Manual
Page 18
18
>
Enable the watchmi service by using the right/left arrow keys to select the on
or off option and then press the OK button.
> Select
Start tutorial
to see a brief introduction.
You will need an Internet connection to do so.
The general terms and conditions (Ts&Cs) for using the watchmi service will then be
displayed.
>
Use the up/down arrow keys to scroll through the Ts&Cs page by page.
>
Use the right/left arrow keys to select any of the following options:
>
Cancel:
The Ts&Cs are closed and you can now decide whether you cant to switch
watchmi on or off.
The default selection is set to on.
>
Reject:
The Ts&Cs are closed and you can now decide whether you cant to switch
watchmi on or off.
The default selection is set to on.
>
Accept:
Use this to accept the general Ts&Cs. The data is also updated and in the
next step you have the option of selecting the channels you want.
The current data for the watchmi channels is then loaded.
After the data has been updated, you have the option of selecting channels and adding them
to your TV list.