TechniSat DIGIT ISIO S2 - Manual (Page 35)

35
> You can now highlight the web link you want using the up/down arrow keys, the
page up/down keys and the numeric keypad keys.
> Pressing the OK button opens the highlighted web link.
The time it takes for the selected site to be displayed depends on the selected site and
the bandwidth of your DSL connection.
8 DVR recording
The following recording modes are available for DVR recording:
1. Instant recording
Select this type of recording to immediately record the programme currently being broadcast
at the push of a button.
2. Timer-controlled recording
This function is used to switch your digital receiver on and off to record the selected
programme onto the recording medium while you are out. The timer can be either manually
programmed or automatically programmed via the SFI function.
3. Timeshift recording
Timeshift recording enables time-shifted TV viewing. You can start to play back a programme
while it is still recording (= timeshifting).
8.1 Instant recording
> Switch to the channel on which the programme you want to record is being broadcast.
> Press the Record button to record the current programme.
> Press the Pause/playback button to play back the current programme from a particular
point.
> To continue playing back the programme from this point, press the Play/Pause button
again.
You are now watching the programme with a time delay to the live broadcast
(Timeshift), while the programme continues to be recorded in the background.
8.2 Timeshift function
The Timeshift function allows you to record and play back at the same time. This enables
time-shifted viewing.
Hence you can start watching the beginning of a recording and skip through any sections
already recorded (e.g. advertising slots). The live broadcast of the programme continues to
be recorded at the same time (see section 9.1.3 in the instruction manual)
8.3 Ending manual recording
> First select the recording to be ended by selecting the channel on which the recording
is running as described under section 8.4.
> Pressing the Stop button generates a query as to whether the recording should be
saved or discarded.