TechniSat DIGIT ISIO S2 - Manual (Page 29)

29
7.3.2 Using the numeric pad keys
> Use the numeric keypad keys to enter the number of the channel you want.
For example:
1 for channel slot 1
1 , then 4 for channel slot 14
2 , then 3, then 4 for channel slot 234
1 , then 5, then 6 then 7 for channel slot 1567
When entering channel numbers with multiple digits, you have approx. three seconds after
pressing a key to complete the entry.
If you wish to enter a number consisting of only one, two or three digits, you can speed up
the entry procedure by keeping the key depressed a little longer on the last digit.
7.3.3 Using the Navigator (channel list)
> Press the OK button.
The channel list navigator then appears. In TV mode only TV channels are shown, and
in radio mode only radio channels are shown.
The channel currently selected is highlighted.
> You can view additional data about the current programme by pressing the INFO
button.
7.3.3.1 Selecting a channel
> You can now highlight the channel you want using the up/down arrow keys, the
page up/down keys and the numeric keypad keys.
> Press the OK button to select the highlighted channel.
7.3.3.2 Selecting a list
To make it easier for you to find channels, your device provides various channel lists. You
can select one of your Favourites lists (see section 12.1) and sort or filter the channels
according to various criteria.
>
Press the OK button.
The active channel list is now displayed.
> You can now highlight the desired channel list using Option selection.