TechniSat DIGIT ISIO S2 - Manual (Page 42)

42
Fault Possible cause Solution
PC will not connect to
device; device will not
connect to network
Wrong network settings Check network settings
(see section 7.5)
Network cable incorrectly
connected
Check network connection
DVR recording no longer
possible
Selected storage medium is
full
Delete existing recording(s)
Attach and use another
storage medium.
(see section 10.4.1)
Cannot delete DVR
recordings
File system on storage
medium is damaged
Check storage medium
(section 10.4.2)
DVR recordings are not
displayed Selected storage medium is
not attached.
Connect configured storage
medium
(see section 10.4.1)
Modify setting for storage
medium
(see section 10.4.1)
A second encrypted channel
will not play.
The two selected channels
are not on the same
transponder
Select two channels that are
on the same transponder.
(see sections 8.4 and 8.4.10)
The CI dual decryption is not
switched on
Switch on CI dual decryption
(see section 19.1)
The CI-/CI+ module used is
not Dual Decrypt compatible
Use a "Dual Decrypt"
compatible module