TechniSat TechniStar S2 - Manual (Page 12)

12
Screen format
> Use the right/left arrow keys to set the screen format for the connected TV.
The screen format on the TV will be automatically adjusted according to your selection.
> Press the green function key Accept to confirm the selection and move on to the
next installation step.
If either Belgium, Netherlands or Luxembourg has been selected in the country
selection, you are then taken to the programme provider selection. Otherwise the
installation continues with selecting the antenna signals.
Selecting the programme provider
> Use the arrow buttons to highlight the Subscription option.
> Press the OK button to open a window with the available programme providers.
> Use the up/down arrow buttons to select the programme provider you want.
> Press the OK button to close the window again.
> Use the arrow buttons to highlight the SD/HD option.
> Press the OK button to open a window where you can select from the HD and SD
entries.
> Use the up/down arrow buttons to select the entry you want.
By selecting HD both HD and SD channels will be scanned and stored in future scans.
By selecting SD only SD channels will be scanned.