TechniSat TechniStar S2 - Manual (Page 31)

7.13.3.3 Timer menu
> Press the red function key (Timer) to open a selection window.
> Use the up/down arrow keys to highlight the Timer type option.
> Confirm with OK.
For control purposes a mask appears for editing timers containing data for the
selected programme. You can make any necessary changes in this.
> Then use the arrow buttons to select the Accept field and confirm with OK to
save the timer.
Your receiver is now set to start the selected programme according to the type of
timer. If the device is switched on by the DVR timer, this will be indicated by the
message “rEc” in the display. In standby mode the active timer is indicated by a clock
icon next to the time.
7.13.4 EPG search
If you want to obtain information relating to a specific programme, you can search for it
automatically. To do so, you just need to enter the title or part of the title of the programme.
The EPG will then scan the data to look for the programme.
> Open the EPG by pressing the SFI button.
> Press the blue function key (EPG menu) to open a selection window.
> Use the up/down arrow buttons to highlight the Search item.
> The EPG Search menu is opened by pressing the OK button.
If no search term is stored in the search selection, the virtual keyboard is displayed
immediately after the menu is called up.
Title of current
programme
If one or more search terms are stored, the menu automatically appears with the search
selection included. In this case select the New Search entry.
> You can now manually enter the full title or part of the title of a programme as a search
term.
31